W22 GENTS / LADIES MALE VOICE CALENDAR WATCH Thank you for purchasing your new W22 watch. Please take a few minutes to read these instructions in order to familiarise yourself with its features. . The watch has four buttons around the edge of the case. Initially press each briefly in turn. The top left button causes the date to be spoken and the top right obtains the time. In the normal running mode the bottom right button will advise you whether the alarm is on or off. The current status of the alarm and vibrating alarm will be announced. If either alarm is turned on this will be announced followed by the alarm time. To change any of the settings: Press and hold the bottom left button for three seconds, the watch will enter the setting menu. Each subsequent press of the bottom left button will step to the next item in the menu which can be changed. To change the current setting press the bottom right button. Once you reach the end of the list the watch will come out of the setting menu. If you wish to exit the setting menu press the top left button, you will hear the current set time announced. Please turn to the next page for information about the menu and setting mode. Settings and changes in setting mode; BOTTOM BOTTOM LEFT RIGHT BUTTON BUTTON Alarm Audible Alarm On/Off Vibrating Alarm On/Off Hourly Report On/Off Set Alarm Hours Select Set Alarm Mins Select Volume 2 Levels Alarm Sounds 2 Sounds Set Year 2004 to 2060 Set Month January to December Set Date Day of Month Set Time Hours Select Set Time Mins Select 12 - 24 Hr Time 12 or 24 Back to the beginning of the list. When setting the time or alarm time the watch will speak in either a.m. / p.m. or 24 hour format depending on which has been selected. When you receive your watch the speech and hands will be synchronised. If you alter the spoken time as previously described you will find that, when you leave the time setting mode, the hands will automatically move to show the correct time. When the battery is replaced and on occasion when the spoken time is changed, it will be necessary to re-synchronise the spoken time and the hands. Please note by holding the top right button for 10 seconds you will hear "ding ding" followed by "12am", your watch will then reset the spoken time to 12am. This is done as follows:- Hold the top left button down until you hear a tone (approx 15 seconds). Release the button then press it again to move the hands. A brief press will move the hands by a minute. Holding the button down will cause the hands to move more rapidly. Position the hands to match the spoken time. 2. Press the top right button to lock the hands—you will hear 12am announced. 3. The hands and speech are now synchronised. You now just need to set the correct time using the speech as described previously in these instructions. The watch has 2 audible alarm sounds and a vibrating alarm. Only one alarm time can be set but you can have both audible and vibrating alarms together or just one or the other, i.e. You can select Audible or Vibrating Alarms on or off independently. This enables you to use a silent vibrating alarm if you do not wish people around you to be disturbed. The audible alarms sound for 1 minute but the vibrating alarm operates for 20 seconds to minimise battery drain. The vibrating unit uses a significant amount of power so we recommend that you do not use it more than necessary in order to maximise the battery life. If you press the top right button while the alarms sounding it will stop and start again after 10 minutes (Snooze function). If you press any other button it will stop and not start again. The Gents version of this watch uses a CR2032 Lithium battery and the Ladies version uses a CR2025. If you return it to us when a replacement is required we will fit a new battery, re-set the time and return the watch to you. Cobolt Systems Ltd The Old Mill House, Mill Road, Reedham, Norwich, Norfolk, NR13 3TL Tel: (01493)700172 Fax: (01493) 701037 Email: sales@cobolt.co.uk Web site: www.cobolt.co.uk Modified 18/03/2020