Magnetic Braille Timer

About your timer:
This timer is a large round timer with a large magnet on the back for ease of 
storage.

Each number has a bump on it and the 
numbers go from 0 to 60 in gradations of 5.  The numbers 0, 15 and 45 have 2 bumps on them.  The 30 at the bottom has 3 bumps on it which also helps to indicate where the 
bottom of the timer is.

The timer always runs anticlockwise and
 always stops on the 0 at the top.

When you want to set the timer to your required time. Twist the large white dial clockwise to 60 minutes, then twist it back anticlockwise to the required time. This must be done every time, the timer is used. By twisting the dial clockwise to 60 minutes before setting your required time, this will allow the spring coil to charge allowing the bell to ring when the timer is complete.  


Please note for ease of reference, the 3 ‘o’ clock position is for 15 minutes, the 6 ‘o’ clock position is for 30 minutes, the 9 ‘o’ clock position is for 45 minutes, and all the way round to the top 12 ‘o’ clock position is for 60 minutes.

Please note  -  this device does not need batteries.
 

Cobolt Systems Ltd
The Old Mill House, Mill Road, 
Reedham, Norwich, Norfolk 
NR13 3TL, England
Tel: 01493-700172     
Fax: 01493-701037
Email: sales@cobolt.co.uk
Website: www.cobolt.co.uk

Modified 18/03/2020